SS IPTV

pellepung wrote:yeah i have read but couldnt find if my serie D is Tizen one or non Tizen ?
:/

hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back

MRF75 wrote:
1. Download "Tizen Studio" https://developer.tizen.org/development ... o/download
2. Install
3. Сreate a certificate. Learn more here https://www.youtube.com/watch?v=W8oBdndgwmE
4. Turn TV into developer mode

For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write local IP of PC where Tizen SDK is installed
Ok
Reboot the TV

5. Open "Tizen Studio"
6. In Connection Explorer, click the "Remote Device Manager" icon.
Next press "Scan", choose your TV, toggle switch "ON", press "Close"
7. download the widget http://ss-iptv.com/files/tizen.wgt
8. Go to File-> Import-> Tizen-> Tizen Project by clicking "Next"

Check the point "Archive file", press "Browse" looking for the downloaded file "tizen.wgt", press "open",
Then "Next"

9. In the window that appears, change the column "Version" from "2.3" to "3.0"
And on the left put tickers in front of "Name" and "Tizen", press "Finish"

10. Now in the "Project Explorer" window has appeared the file "tizen-tv-3.0"
11. Click on it with the right mouse button and choose "Build Signed Package"
12. Finally, again, with the right mouse button, send the widget to the TV "Run As" -> "1 Tizen Web Application"

fornacs_90 wrote:

hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back

MRF75 wrote:
1. Download "Tizen Studio" https://developer.tizen.org/development ... o/download
2. Install
3. Сreate a certificate. Learn more here https://www.youtube.com/watch?v=W8oBdndgwmE
4. Turn TV into developer mode

For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write local IP of PC where Tizen SDK is installed
Ok
Reboot the TV

5. Open "Tizen Studio"
6. In Connection Explorer, click the "Remote Device Manager" icon.
Next press "Scan", choose your TV, toggle switch "ON", press "Close"
7. download the widget http://ss-iptv.com/files/tizen.wgt
8. Go to File-> Import-> Tizen-> Tizen Project by clicking "Next"

Check the point "Archive file", press "Browse" looking for the downloaded file "tizen.wgt", press "open",
Then "Next"

9. In the window that appears, change the column "Version" from "2.3" to "3.0"
And on the left put tickers in front of "Name" and "Tizen", press "Finish"

10. Now in the "Project Explorer" window has appeared the file "tizen-tv-3.0"
11. Click on it with the right mouse button and choose "Build Signed Package"
12. Finally, again, with the right mouse button, send the widget to the TV "Run As" -> "1 Tizen Web Application"

Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:

failed to connect to 192.168.XX.XXX:XXXXX

You may get this message for following reasons:

-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)

What can I do?
Thanks to all

Eddy wrote:

fornacs_90 wrote:

hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back

Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:

failed to connect to 192.168.XX.XXX:XXXXX

You may get this message for following reasons:

-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)

What can I do?
Thanks to all

Look very close to your ip network (tv)connection... Sometime is different. Tv has (for example)192.168.1.100 and your pc has 192.168.1.101.... Type the tv ip

fornacs_90 wrote:

Eddy wrote:

fornacs_90 wrote:
Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:

failed to connect to 192.168.XX.XXX:XXXXX

You may get this message for following reasons:

-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)

What can I do?
Thanks to all

Look very close to your ip network (tv)connection... Sometime is different. Tv has (for example)192.168.1.100 and your pc has 192.168.1.101.... Type the tv ip

Ok, now I have another problem, when I'm choosing the tizen.wgt file, if I try to change the Version, I cannot choose the 3.0, it remain 2.3... and in the Profile I can choose only "wearable" or "mobile", the "tv" profile is set from default but I cannot change the version.. See the picture below in the link..

https://ibb.co/ikeVQF

hilary trump wrote:

Fedez76 wrote:

hilary trump wrote:http://developer.samsung.com/gear/devel ... tes/create

Can't connect remote.
Turned on develop with local IP but Tizen Studios won't connect

you should connect the TV with your PC via "Remote Device Manage" after you add your PC's local IP on your TV
There are 2 ways:
1. Simply press "Scan" and follow my previous post
2. Manually add by press "+" : _Name: anyname you want
_ IP: write extractly your TV's local IP address
Finish by "Add"

Fedez76 wrote:Hi and thanks for your reply.
On tv I have to put my pc's IP and on Tizen studio the IP of TV?
Maybe I have to do it manually because using scan in Tizen studio don't show my TV in develop mode with pc's IP set

For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write local IP of PC where Tizen SDK is installed
Ok
Reboot the TV

ricky619 wrote:I temporanely resolved with usb
i downloaded this http://ss-iptv.com/files/samsung.zip extract and put it in usb and after i see ssiptv in more applications and all work like ever