Samsung tv app automatic removed

SS IPTV App for LG Smart TV discussion
Post Reply
mandrea
Ensign
Ensign
Posts: 1
Joined: 02 Jul 2017, 22:45
TV Model: UE65JU6400
Italy

Re: Samsung tv app automatic removed

Post by mandrea »

Hi there I've the same problem,
I tried to modify the geolocation of my Samsung tv but doesn't work...
I've the model UE65JU6400 anyone know how can reinstall ss ip-TV app on my smart tv?
Thanks to all

Eddy
Lieutenant
Lieutenant
Posts: 30
Joined: 30 Jun 2017, 12:48
TV Model: UE40KU6079
Germany

Re: Samsung tv app automatic removed

Post by Eddy »

pellepung wrote:yeah i have read but couldnt find if my serie D is Tizen one or non Tizen ?
:/

1000 time that same question .......
Tizen OS has only "k" and "j (new)" series... Look at your model UE55D7005LUXXE. You have no tizen "d" serie.... Use the usb instalation option. Good luck
Last edited by Eddy on 03 Jul 2017, 00:26, edited 2 times in total.

fornacs_90
Ensign
Ensign
Posts: 9
Joined: 02 Jul 2017, 22:51
TV Model: Samsung UE40JU6400K
Italy

Re: Samsung tv app automatic removed

Post by fornacs_90 »

hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back
MRF75 wrote:
1. Download "Tizen Studio" https://developer.tizen.org/development ... o/download
2. Install
3. Сreate a certificate. Learn more here https://www.youtube.com/watch?v=W8oBdndgwmE
4. Turn TV into developer mode

For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write local IP of PC where Tizen SDK is installed
Ok
Reboot the TV

5. Open "Tizen Studio"
6. In Connection Explorer, click the "Remote Device Manager" icon.
Next press "Scan", choose your TV, toggle switch "ON", press "Close"
7. download the widget http://ss-iptv.com/files/tizen.wgt
8. Go to File-> Import-> Tizen-> Tizen Project by clicking "Next"

Check the point "Archive file", press "Browse" looking for the downloaded file "tizen.wgt", press "open",
Then "Next"

9. In the window that appears, change the column "Version" from "2.3" to "3.0"
And on the left put tickers in front of "Name" and "Tizen", press "Finish"

10. Now in the "Project Explorer" window has appeared the file "tizen-tv-3.0"
11. Click on it with the right mouse button and choose "Build Signed Package"
12. Finally, again, with the right mouse button, send the widget to the TV "Run As" -> "1 Tizen Web Application"


Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:

failed to connect to 192.168.XX.XXX:XXXXX

You may get this message for following reasons:

-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)

What can I do?
Thanks to all

Eddy
Lieutenant
Lieutenant
Posts: 30
Joined: 30 Jun 2017, 12:48
TV Model: UE40KU6079
Germany

Re: Samsung tv app automatic removed

Post by Eddy »

fornacs_90 wrote:
hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back
MRF75 wrote:
1. Download "Tizen Studio" https://developer.tizen.org/development ... o/download
2. Install
3. Сreate a certificate. Learn more here https://www.youtube.com/watch?v=W8oBdndgwmE
4. Turn TV into developer mode

For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write local IP of PC where Tizen SDK is installed
Ok
Reboot the TV

5. Open "Tizen Studio"
6. In Connection Explorer, click the "Remote Device Manager" icon.
Next press "Scan", choose your TV, toggle switch "ON", press "Close"
7. download the widget http://ss-iptv.com/files/tizen.wgt
8. Go to File-> Import-> Tizen-> Tizen Project by clicking "Next"

Check the point "Archive file", press "Browse" looking for the downloaded file "tizen.wgt", press "open",
Then "Next"

9. In the window that appears, change the column "Version" from "2.3" to "3.0"
And on the left put tickers in front of "Name" and "Tizen", press "Finish"

10. Now in the "Project Explorer" window has appeared the file "tizen-tv-3.0"
11. Click on it with the right mouse button and choose "Build Signed Package"
12. Finally, again, with the right mouse button, send the widget to the TV "Run As" -> "1 Tizen Web Application"


Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:

failed to connect to 192.168.XX.XXX:XXXXX

You may get this message for following reasons:

-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)

What can I do?
Thanks to all


Look very close to your ip network (tv)connection... Sometime is different. Tv has (for example)192.168.1.100 and your pc has 192.168.1.101.... Type the tv ip

pellepung
Ensign
Ensign
Posts: 3
Joined: 02 Jul 2017, 21:47
TV Model: UE55D7005LUXXE
Sweden

Re: Samsung tv app automatic removed

Post by pellepung »

All works fine now thx for the help!

fornacs_90
Ensign
Ensign
Posts: 9
Joined: 02 Jul 2017, 22:51
TV Model: Samsung UE40JU6400K
Italy

Re: Samsung tv app automatic removed

Post by fornacs_90 »

Eddy wrote:
fornacs_90 wrote:
hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back


Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:

failed to connect to 192.168.XX.XXX:XXXXX

You may get this message for following reasons:

-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)

What can I do?
Thanks to all


Look very close to your ip network (tv)connection... Sometime is different. Tv has (for example)192.168.1.100 and your pc has 192.168.1.101.... Type the tv ip


Ok, now I have another problem, when I'm choosing the tizen.wgt file, if I try to change the Version, I cannot choose the 3.0, it remain 2.3... and in the Profile I can choose only "wearable" or "mobile", the "tv" profile is set from default but I cannot change the version.. See the picture below in the link..

https://ibb.co/ikeVQF

Eddy
Lieutenant
Lieutenant
Posts: 30
Joined: 30 Jun 2017, 12:48
TV Model: UE40KU6079
Germany

Re: Samsung tv app automatic removed

Post by Eddy »

fornacs_90 wrote:
Eddy wrote:
fornacs_90 wrote:
Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:

failed to connect to 192.168.XX.XXX:XXXXX

You may get this message for following reasons:

-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)

What can I do?
Thanks to all


Look very close to your ip network (tv)connection... Sometime is different. Tv has (for example)192.168.1.100 and your pc has 192.168.1.101.... Type the tv ip


Ok, now I have another problem, when I'm choosing the tizen.wgt file, if I try to change the Version, I cannot choose the 3.0, it remain 2.3... and in the Profile I can choose only "wearable" or "mobile", the "tv" profile is set from default but I cannot change the version.. See the picture below in the link..

https://ibb.co/ikeVQF

I think you must start Package Manager
And instal missing components including Extension SDK

Fedez76
Ensign
Ensign
Posts: 16
Joined: 08 Apr 2017, 08:52
TV Model: Ue40j6200
Italy

Re: Samsung tv app automatic removed

Post by Fedez76 »

hilary trump wrote:
Fedez76 wrote:

Can't connect remote.
Turned on develop with local IP but Tizen Studios won't connect

you should connect the TV with your PC via "Remote Device Manage" after you add your PC's local IP on your TV
There are 2 ways:
1. Simply press "Scan" and follow my previous post
2. Manually add by press "+" : _Name: anyname you want
_ IP: write extractly your TV's local IP address
Finish by "Add"

Hi and thanks for your reply.
On tv I have to put my pc's IP and on Tizen studio the IP of TV?
Maybe I have to do it manually because using scan in Tizen studio don't show my TV in develop mode with pc's IP set

hilary trump
Ensign
Ensign
Posts: 8
Joined: 30 Jun 2017, 07:05
TV Model: ua49k5500ak
Vietnam

Re: Samsung tv app automatic removed

Post by hilary trump »

Fedez76 wrote:Hi and thanks for your reply.
On tv I have to put my pc's IP and on Tizen studio the IP of TV?
Maybe I have to do it manually because using scan in Tizen studio don't show my TV in develop mode with pc's IP set

Yes, You have to put your PC's local IP on the TV. Have you done this step? If you have not done. Here what you have to do: http://www.tizenexperts.com/2015/09/dev ... tizen-tvs/
+Turn Developer mode on your TV: this procedure depends on what model your TV is.
For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write local IP of PC where Tizen SDK is installed
Ok
Reboot the TV

Next time when you open Apps on your TV a message appears on Apps section indicating DEVELOPER MODE in red letters.

+Put your TV's IP on Tizen studio: I think if above step is Ok, you could use "Scan" on "Remote Device Manager". If can not use "Scan", no problem you can manually put it by following my previous post

I hope my post could help you. Sorry my English is not really good :evil:

Alessio79
Ensign
Ensign
Posts: 4
Joined: 05 Jun 2017, 22:57
TV Model: ue40h6200
Italy

Re: Samsung tv app automatic removed

Post by Alessio79 »

ricky619 wrote:I temporanely resolved with usb
i downloaded this http://ss-iptv.com/files/samsung.zip extract and put it in usb and after i see ssiptv in more applications and all work like ever


where is "more applications"?
thanks

Post Reply