Page 7 of 16
Re: Samsung tv app automatic removed
Posted: 02 Jul 2017, 22:51
by mandrea
Hi there I've the same problem,
I tried to modify the geolocation of my Samsung tv but doesn't work...
I've the model UE65JU6400 anyone know how can reinstall ss ip-TV app on my smart tv?
Thanks to all
Re: Samsung tv app automatic removed
Posted: 02 Jul 2017, 22:57
by Eddy
pellepung wrote:yeah i have read but couldnt find if my serie D is Tizen one or non Tizen ?
:/
1000 time that same question .......
Tizen OS has only "k" and "j (new)" series... Look at your model UE55
D7005LUXXE. You have no tizen "d" serie.... Use the usb instalation option. Good luck
Re: Samsung tv app automatic removed
Posted: 02 Jul 2017, 22:59
by fornacs_90
hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back
MRF75 wrote:1. Download "Tizen Studio"
https://developer.tizen.org/development ... o/download2. Install
3. Сreate a certificate. Learn more here
https://www.youtube.com/watch?v=W8oBdndgwmE4. Turn TV into developer mode
For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write
local IP of PC where Tizen SDK is installed
Ok
Reboot the TV
5. Open "Tizen Studio"
6. In Connection Explorer, click the "Remote Device Manager" icon.
Next press "Scan", choose your TV, toggle switch "ON", press "Close"
7. download the widget
http://ss-iptv.com/files/tizen.wgt8. Go to File-> Import-> Tizen-> Tizen Project by clicking "Next"
Check the point "Archive file", press "Browse" looking for the downloaded file "tizen.wgt", press "open",
Then "Next"
9. In the window that appears, change the column "Version" from "2.3" to "3.0"
And on the left put tickers in front of "Name" and "Tizen", press "Finish"
10. Now in the "Project Explorer" window has appeared the file "tizen-tv-3.0"
11. Click on it with the right mouse button and choose "Build Signed Package"
12. Finally, again, with the right mouse button, send the widget to the TV "Run As" -> "1 Tizen Web Application"
Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:
failed to connect to 192.168.XX.XXX:XXXXX
You may get this message for following reasons:
-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)
What can I do?
Thanks to all
Re: Samsung tv app automatic removed
Posted: 02 Jul 2017, 23:14
by Eddy
fornacs_90 wrote:hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back
MRF75 wrote:1. Download "Tizen Studio"
https://developer.tizen.org/development ... o/download2. Install
3. Сreate a certificate. Learn more here
https://www.youtube.com/watch?v=W8oBdndgwmE4. Turn TV into developer mode
For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write
local IP of PC where Tizen SDK is installed
Ok
Reboot the TV
5. Open "Tizen Studio"
6. In Connection Explorer, click the "Remote Device Manager" icon.
Next press "Scan", choose your TV, toggle switch "ON", press "Close"
7. download the widget
http://ss-iptv.com/files/tizen.wgt8. Go to File-> Import-> Tizen-> Tizen Project by clicking "Next"
Check the point "Archive file", press "Browse" looking for the downloaded file "tizen.wgt", press "open",
Then "Next"
9. In the window that appears, change the column "Version" from "2.3" to "3.0"
And on the left put tickers in front of "Name" and "Tizen", press "Finish"
10. Now in the "Project Explorer" window has appeared the file "tizen-tv-3.0"
11. Click on it with the right mouse button and choose "Build Signed Package"
12. Finally, again, with the right mouse button, send the widget to the TV "Run As" -> "1 Tizen Web Application"
Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:
failed to connect to 192.168.XX.XXX:XXXXX
You may get this message for following reasons:
-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)
What can I do?
Thanks to all
Look very close to your ip network (tv)connection... Sometime is different. Tv has
(for example)192.168.1.10
0 and your pc has 192.168.1.10
1.... Type the tv ip
Re: Samsung tv app automatic removed
Posted: 03 Jul 2017, 01:08
by pellepung
All works fine now thx for the help!
Re: Samsung tv app automatic removed
Posted: 03 Jul 2017, 01:28
by fornacs_90
Eddy wrote:fornacs_90 wrote:hilary trump wrote::) for who has a Tizen TV. Follow below instruction, you will get SS IPTV back
Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:
failed to connect to 192.168.XX.XXX:XXXXX
You may get this message for following reasons:
-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)
What can I do?
Thanks to all
Look very close to your ip network (tv)connection... Sometime is different. Tv has
(for example)192.168.1.10
0 and your pc has 192.168.1.10
1.... Type the tv ip
Ok, now I have another problem, when I'm choosing the tizen.wgt file, if I try to change the Version, I cannot choose the 3.0, it remain 2.3... and in the Profile I can choose only "wearable" or "mobile", the "tv" profile is set from default but I cannot change the version.. See the picture below in the link..
https://ibb.co/ikeVQF
Re: Samsung tv app automatic removed
Posted: 03 Jul 2017, 02:28
by Eddy
fornacs_90 wrote:Eddy wrote:fornacs_90 wrote:
Hi, I'm trying to follow these steps but when I'm at the point 6, the scan result show me my TV but if I switch it to "ON" the software report me this error:
failed to connect to 192.168.XX.XXX:XXXXX
You may get this message for following reasons:
-This remote device already connected to another one (But no.. it's not true!)
-This remote device is running on non-standard (???)
-There is no IP address, please check the physical connection (I think this is not the problem!)
What can I do?
Thanks to all
Look very close to your ip network (tv)connection... Sometime is different. Tv has
(for example)192.168.1.10
0 and your pc has 192.168.1.10
1.... Type the tv ip
Ok, now I have another problem, when I'm choosing the tizen.wgt file, if I try to change the Version, I cannot choose the 3.0, it remain 2.3... and in the Profile I can choose only "wearable" or "mobile", the "tv" profile is set from default but I cannot change the version.. See the picture below in the link..
https://ibb.co/ikeVQF
I think you must start Package Manager
And instal missing components including Extension SDK
Re: Samsung tv app automatic removed
Posted: 03 Jul 2017, 09:11
by Fedez76
hilary trump wrote:Fedez76 wrote:Can't connect remote.
Turned on develop with local IP but Tizen Studios won't connect
you should connect the TV with your PC via "Remote Device Manage" after you add your PC's local IP on your TV
There are 2 ways:
1. Simply press "Scan" and follow my previous post
2. Manually add by press "+" : _Name: anyname you want
_ IP: write extractly your TV's local IP address
Finish by "Add"
Hi and thanks for your reply.
On tv I have to put my pc's IP and on Tizen studio the IP of TV?
Maybe I have to do it manually because using scan in Tizen studio don't show my TV in develop mode with pc's IP set
Re: Samsung tv app automatic removed
Posted: 03 Jul 2017, 11:19
by hilary trump
Fedez76 wrote:Hi and thanks for your reply.
On tv I have to put my pc's IP and on Tizen studio the IP of TV?
Maybe I have to do it manually because using scan in Tizen studio don't show my TV in develop mode with pc's IP set
Yes, You have to put your PC's local IP on the TV. Have you done this step? If you have not done. Here what you have to do:
http://www.tizenexperts.com/2015/09/dev ... tizen-tvs/+Turn Developer mode on your TV: this procedure depends on what model your TV is.
For Samsung's latest series, this is done in a similar way
Go to Apps
On the remote, press 1,2,3,4,5
In the window that appears, write local IP of PC where Tizen SDK is installed
Ok
Reboot the TV
Next time when you open Apps on your TV a message appears on Apps section indicating DEVELOPER MODE in red letters.
+Put your TV's IP on Tizen studio: I think if above step is Ok, you could use "Scan" on "Remote Device Manager". If can not use "Scan", no problem you can manually put it by following my previous post
I hope my post could help you. Sorry my English is not really good
Re: Samsung tv app automatic removed
Posted: 03 Jul 2017, 13:16
by Alessio79
ricky619 wrote:I temporanely resolved with usb
i downloaded this
http://ss-iptv.com/files/samsung.zip extract and put it in usb and after i see ssiptv in more applications and all work like ever
where is "more applications"?
thanks